ICMCTF2010 Wednesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, April 28, 2010
8:00 AM 9:00 AM 10:00 AM 11:00 AM
A1-3
Determination of the DBTT of Aluminide Coatings and its Influence on the Mechanical Behavior of Coated Specimens
Oxidation Performance of Low-Temperature Pack Aluminide Coatings on Ferritic-Martensitic Steels
The Dependence of High Temperature Resistance of Aluminized Steel Exposed to Water Vapour Oxidation
Thin Pure-Metal Films Allowing to Rapid Development of α-Al2O3 Scale on High-Temperature Alloys and Coatings
Development of Thermally Grown Oxide on β-NiAl During Initial Stages of Oxidation at 1100oC
Influence of Thermal Exposure on the Stability of Non-Equilibrium Microstructures of Sputter Deposited Nanocrystalline 304 and 310 SS Coatings
Microstructure and High Temperature Oxidation Behavior of Hot Dip Aluminized Coating on High Silicon Ductile Iron
A review of Sulphidation and Oxidation Processes in Gasturbines, their Simulation and Modelling via Laboratory Tests
B2
Arc Plasma Acceleration: A Method for Improving Coating Quality by Decreasing Macro Particle Inclusions
The Electron Beam High Rate Deposition in Combination with Guided Arc Discharges - Present State and Actual Developments
Structure and Mechanical Properties of Single- and Multilayer Hard TiAlN/TiAlYN-based Coatings, Produced by Reactive Cathodic-Arc Evaporation
Microstructure Evolution of Ti3SiC2 MAX Phase Cathodes During Reactive Cathodic Arc Evaporation
Influence of Process Parameters on Structure of TiAlN Coating Prepared by a System With Rotary Arc Cathodes
Optimization of Micro Arc Oxidation Processes for Corrosion Resistance of Ti6Al4Valloys by Using Taguchi Method
Phase Formation of Alumina Thin Films Deposited by Ionized PVD
Processing With Pulsed Plasmas: A Comparison of Cathodic Arcs and High Power Impulse Magnetron Sputtering
Evaluation of Residual Stress and Coating Composition on Rounded Surfaces and Edges by Measurements and Cutting Tests
Highly Transparent and Conductive ZnO:Al Thin Films Prepared by Laser Induced High Current Pulsed Arc at Low Deposition Temperature
C3
Photoluminescence, Photoacoustic and Raman Spectra of Zinc Oxide Films Grown by LP-MOCVD Using Diethylzinc and Water as Precursors
ZnO Preferred Orientation Control by Homo- and Hetro-Structure Buffer Layer Growth on Si (111) Using Atomic Layer Deposition with Flow-Rate Interruption Method
Study of Magnetic Interfaces with Polarized Soft X-Rays
Vectorial Scattering Spectroscopic Ellipsometry Analysis of Dielectric Thin Films on Textured Solar Cells
In-Situ Studies on Thin Functional Polymer Films by Ellipsometry and Vibrational Spectroscopy
Monitoring Protein Deposition of Self-Assembled Monolayers of Alkanethiols on Gold In Situ with Combined Quartz Crystal Microbalance and Spectroscopic Ellipsometry
Evolution of Crystalline Phase Formation of Titanium Oxide Thin Films using Reactive Magnetron Sputtering and Annealing
Pulsed Laser Deposition of (MoO3)1-x(V2O5)x Thin Films: Preparation, Characterization and Gasochromic Studies
Numerical Ellipsometry: Advanced Analysis of Thin Absorbing Films in the n-k Plane
E2-3
Viscoelastic Properties of Thin Polymer Film on Rigid Substrate
Mechanical Properties Determined Via Probing of Freestanding Thin Films
Numerical Study of Tensile Tests Conducted on Systems with Elastic-Plastic Films Deposited onto Elastic-Plastic Substrates
Thermal Fatigue of Ion Nitrided and Duplex-Treated Hot-Work Tool Steel
Contact Resonance Force Microscopy Technique to Determine Local Elastic Properties
Semiconductor Nanowires in Novel Device Concepts: the need for Structural and Mechanical Integrity and Ways to Reliably Characterize these Properties
Development of a Biaxial Tensile Module at Synchrotron Beamline for the Study of Mechanical Properties of Supported Thin Films
Determination of Residual Stresses and their Relaxation in Brush-Plated Gold and Silver Coatings Depending on Current Density
Nano Mechanical Characterization of Ultra Thin DLC Coatings by Nanoindentation and Nano Scratch Testing
G2
Plasma Coatings for High Efficient Power Train in Automobile
Wear and Corrosion Protection of AJ62 Mg Alloy by Plasma Electrolytic Oxidation (PEO) Process for Mg Engine Application
A Study on the Influence of Bond Material on Honing Engine Cylinder Bores with Diamond Coated Stones
Opportunities and Challenges to Coatings Applications in the Automotive Industry - Select Case Studies
Influence of Simulated Stamping Force on Coating Failure Behavior
From Coatings to Electrochemical Energy Storage for Automotive Applications
H3
Nano-Scale Surface Engineering for Tribological and Biomedical Applications
Influence of Rare Earth Element Incorporation on the Behavior of Magnetron Sputtered Al Based Alloys
Corrosion Resistance of Amorphous Niobium Oxide Thin Films
Electrochemical Behavior of the TiN Coating for the Orthopedic Applications: Influence of Immersion Time and Protein Content
Surface Nanocrystallization in a NiTi Alloy Subjected to Surface Mechanical Attrition Treatment
Bio-Corrosion and Cell Culture: Implications in Dentistry and Orthopedics
Comparison of the Properties of Al-Ti and Al-Mg EBPVD Coatings
Influence of pH on the Tribocorrosion Nature of the CpTi in an Oral Environment: Mechanisms and Synergism
In-Situ Impedance Spectroscopy Characterisation of Plasma Electrolytic Oxidation Process for Deposition of Ca- and P-Containing Coatings on Ti
Tribological Behaivor and Corrosion Performance of Nanocomposite Coating Layer of nc-TiN/a-Si3N4 Deposited by Sputtering on AISI 316L Stainless Steel Duplex for Biomedical Applications
Identification of Tribo-Corrosion Regimes for Dental Materials and Coatings
TS1
Printed Electronic and Photonic Materials for Device Applications
Microscopic Characterization of Organic Thin Films for Applications in Organic Electronics
Controlling Organic Semiconductor Growth for High Performance Organic Transistors
Controlling Organic Semiconductor Crystallization and Morphology using Solution Shearing
Aligned Growth of Pentacene on Pre-Patterned Substrates
Computational Insight Towards Understanding Design Rules for Functional II-Electron Systems
Architectural Complexity and Tunable Chemical Function in Metal - Organic Coordination Networks at Surfaces
A Family of High Strength Ternary Titanium and Vanadium Nitride Thin Films
Sessions | Time Periods | Topics | Schedule Overview