Development of Multi-Element Nitride/Oxide Coatings

Preferential Sputtering of Oxides and Target Design for Stable Reactive Magnetron Deposition of Oxides

Low Temperature Deposition of Anatase TiO₂ Film by Dual Magnetron Sputtering

Photocatalysis and Phase Transformation of Oxygen-Deficient Carbon-Containing Titania Films

Nucleation and Crystal Growth Behavior of α-Alumina by Reactive Magnetron Sputtering

Low-Temperature Deposition of Alpha Alumina by Physical Vapor Deposition without a Chrome Template Layer

RF Sputtered Piezoelectric Zinc Oxide Layers for Microfluidic Applications

Phase Transition and Mechanical Properties of Zr(N,O) Thin Films on AISI 304 Stainless Steel

Preparation of Artificial BiFeO₃/SrTiO₃ Superlattices by rf Sputtering

PVD Module for High Quality AC Reactive Sputtering of Oxide and Nitride Thin Films

Adhesion Improvement of Reactive RF-Sputtered Zirconium Nitride Films on WC Substrate

ZnO:Al Transparent Conducting Oxide Films of Very High Quality Synthesized by Filtered Cathodic Arc Deposition

Influence of Thermal Annealing on Electrical and Optical Properties of Ga-Doped ZnO Thin Films

Attractive Potential Substitute for ITO in Flat Panel Display

Thermopower and Optical Studies on Undoped and Manganese Doped Indium Tin Oxide Films

Reactively Co-Sputtering Transparent Conducting Oxide Films of Nb-Doped Titania

Structural, Electrical and Optical Properties of Transparent Zn_1-xMg_xO Nanocomposite Thin Films

Applications of Nanocomposites in Organic Electronic Devices

Cermet Structured a-c:H/Pt Thin Films as High Temperature Selective Solar Absorber Coatings

Microstructure and Mechanical Properties of CrAlN/Si₃N₄ Nanostructure Multilayered Coatings

Sol Gel Derived Hybrid Dielectric Thin films for ULSI Applications

Interfacial Scratch Adhesion Behavior of Multilayered Ti(BN):Ti(MoS₂) Based PVD Coatings

Optimization of AlN Coatings for Tribological Applications

Surface Chemical Mechanisms of Lubricants Under Sliding Conditions

Expanding the Range of Temperature-Adaptive Solid Lubricant Coatings Beyond 25-700°C with the Aid of In Situ Wear and Surface Analysis Techniques

Optimization of the Coating Parameters for Micro Arc oxidation of Cp-Ti

Effects of Sicking-Sliding Zones on the Tool Wear and Coating Delamination When Machining Hard Materials

Quantification of the Incorporation Coefficient of a Reactive Gas on a Metallic Film During Magnetron Sputtering: the Method and Results

Experimental and Numerical Plasma Characterization in a Deep Reactive Ion Etch System

Initial Stages of Polycrystalline Thin Film Growth as Seen by Scanning Probe Microscopy

Surface Mound Formation During Epitaxial Growth of CrN(001)

In Situ Stress Evolution in TiZrN and TiTaN Thin Films Grown by Reactive Magnetron Sputtering

In Situ AFM Investigation on Tribo-Corrosion of CrSiN Film Adherent Tool Steel

Fast Characterization of Reaction Waves in Exothermic, Metal-Metal Multilayer Nanolaminates

Quantitative Measurement of Ion Energy Distributions Impinging onto Arbitrarily Biased Substrates During Plasma Deposition

Innovative Applications Enabled by Large Area Hot Filament Diamond Deposition

Industrial Scale Production of CVD-Diamond Coated Mechanical Seals and Electrodes

Characterization of Industrial-Scale LAFAD Technology and Applications

Development of a Magnetically Steered Cathodic Arc Evaporation Source

Integration Aspects of High Impulse Magnetron Sputtering Plus (HIPIMS+) Technology in an Industrial PVD Coating Machine

The New Vacotec/Eifeler Alpha 400/900P PVD Deposition System as a Basis for Innovative Coatings for Industries and Research

Hot Filament Diamond CVD – Technology and Applications

Manufacturing Photovoltaic Systems

Steady State and Transient Photoconductivity of a-Se_90-xSb₁₀In_x (0 ≤ x ≤ 15) Thin Films

Glancing-Angle Deposited Titania Films for Dye-Sensitized Solar Cells

High Performance Polymer Soloar Cells and Optical Sensors

Hybrid Solar Cells Based on Poly (3-Hexylthiophene):Fullerene Blend and TiO₂ Porous Film

Photoelectrochemical Properties of Nitrogen-Doped Indium Tin Oxide Thin Films Prepared by Reactive DC Magnetron Sputtering Technique

Electroplated Coatings on Ferritic Steels for SOFC Interconnect Application

Improved Properties of SOFCs using Pre-Coated Sandvik Sanergy HT 22% Cr Ferritic Interconnect Steel

Development of Spinel Protection Layers for Steel-Based SOFC Interconnects

Structure and Conductivity of Apatite-Like Lanthanum Silicate Films for SOFcs Electrolytes

The Corrosion Properties and Interfacial Contact Resistance of TiN, TiAlN and CrN PVD Coatings in Simulated PEM Fuel Cell Environments