Reinforced Carbon Foams Prepared by Chemical Vapor Infiltration : a Process Modeling Approach

Simulation of Preform Morphological Evolution During Chemical Vapor Infiltration to Obtain Infiltrability Properties

Nanostructured Multilayer Metallurgical Coatings Grown by Atmospheric Pressure DLI-CVD: Application to Chromium Carbides and Nitrides

Thermodynamic Simulation of Atmospheric DLI-CVD Processes for the Growth of Chromium Based Hard Coatings Using Bis(benzene)Chromium as Molecular Source

Self-Organization of Structure Defects in Super-Hard Nanocomposites

Combined Effects of Wear and Oxidation of Mixed Arc-Evaporated / Magnetron Sputtered CrSiN Coatings Deposited on Steel

Growth and Mechanical Properties of Nanocomposite Cr-Si-N Films by a Hybrid Coating System

Electronic Structure, Mechanical and Structural Properties of Al-Si-N Nanocomposite Coatings

Influence of Si and Al Content on the Oxidation Kinetics of Arc Evaporated Al-Cr-N Thin Films

Influence of the Nitriding and TiAlN Coating Thickness on the Mechanical and Tribological Properties of Duplex Coating Systems on H13 Die Steel

Friction and Galling Properties of Coatings and Surface Treatments for Cold Forming Applications

Surface-Nano-Texturing by Aluminum-Induced Crystallization of Amorphous Silicon

Abrasive Wear Resistance of Ti_1-xAl_xN Hard Coatings Deposited by a Vacuum Arc System with Lateral Rotating Cathodes

Arc Evaporated Ti-Al-Ta-N Coatings: the Effect of Bias Voltage and Ta on High-Temperature Tribological Properties

Advanced Analysis Methods for Advanced Coatings: The Use of Ions, Photons and Electrons

Microstructural and Compositional Studies of TiAlSiN Nanostructured Coatings

Characterisation of Silica Films Deposited on Titanium Substrates: Analysis of Surface Chemistry, Morphology and Functional Hydroxyl Groups

PVD-Grown Photocatalytic TiO₂ Thin Films on Polymer Substrates for Sensors and Actuators Applications

SEM and Raman Study of Anatase Nano-Structures

Approaches to High Performance Coating Solutions by Means of Hybrid PVD and Duplex Process Technologies

Performance of Arc Coated Carbide Drills in Dependence of Post-Treatment-Techniques

Improvements in High Performance Cutting Due to Cutting Edge Design

Mechanical Post-Treatment of CVD Coated Cemented Cutting Tools for Increased Toughness and Failure Resistance

Surface Functionalization of Surgical Implants for Cell Guidance and Control

Smart Modification of Magnetron Sputtered TiN Surfaces for Stimulated Differentiation

Surface Immobilization and Characterization of Biomolecules