ICMCTF2007 Monday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, April 23, 2007
1:30 PM 2:30 PM 3:30 PM
A1-1
Creep in α-Al2O3 Thermally Grown on β-NiAl and NiAlPt Alloys
Confocal Photo-Stimulated Microspectroscopy: A Technique to Map Residual Stresses in Thermally Grown Oxides in 3D
Gas Phase Aluminizing of Nickel Alloys with Hydrogen Chloride
Development of Internal Porosity in Platinum-Aluminide Coatings During Cyclic Oxidation
Examination of the Platinum Effect on the Oxidation Behavior of Nickel-Aluminide Coatings
Effects of γ-Ni+γ'-Ni3Al-Based Coating Composition on Oxidation Behavior and Superalloy Compatibility
Synthesis and Oxidation Performance of Al-Modified γ+γ' Bond Coatings on Ni-Based Superalloys
B2-1
Bonding Network in Filtered-Arc-Deposited Carbon Films: Simulation and Characterization
Filling Trenches on a SiO2 Substrate with Cu Using a Hot Refractory Anode Vacuum Arc
Venetian Blind Filter System for Arc-Evaporation - Deposition of Nearly Droplet Free Hard and Wear Resistant Coatings for Cutting Tools
Control of Film Composition Using Multiple Cathodes in a High Current Pulsed Arc: Synthesis of MAX Phase Alloys and Ti/C Multilayers
High Temperature Phase Changes and Oxidation Behavior of Cr-Si-N Coatings
Deposition of Superhard CrAlSiN Thin Films by Cathodic Arc Plasma Deposition
Characterization of Quaternary Cr Based Nitride Films Synthesized by Cathodic Arc Method
Syntheses and Mechanical Properties of Cr-Mo-Si-N Coatings by a Hybrid Coating System
B5-2
Industrial Perspective on Characterization of Hard Coatings for Cutting Tool Applications
Properties and Cutting Performance of AlTiCrN/TiSiCN Bilayer Coatings Deposited by Cathodic Arc Ion Plating
Effect of Film Deposition Time on the Mechanical Properties and Cutting Performance of Coated Tools
A Study on the Microstructures and Mechanical Properties of Pulsed DC Reactive Magnetron Sputtered Cr-Si-N Nanocomposite Coatings
Cracking and Failure Behaviour of Nitride Coatings
Abrasive Wear of Textured-Controlled CVD Al2O3 Coatings
Low Temperature Alumina Coatings by AC Inverted Magnetron Sputtering Technique
Characterization of DLC Coatings Deposited by Large Area Filtered Arc Deposition Technique
Effect of Humidity on Lubricated Fullerene-Like Carbon Nitride Overcoats
E1-1
Improvement of the Slurry Erosion Resistance of an Austenitic Stainless Steel with Combinations of Surface Treatments: Nitriding and TiN Coating
The Critical Conditions for Tribo-Demagnetization of Magnetic Layered Disk in Sliding Contact Against Head
Novel Tribological Systems Using Shape Memory Alloys and Thin Films
Low Earth Orbit Space Environmental Effects on MoS2/DLC Lubrication Films
Growth, Structure and High Temperature Friction Behavior of Titanium Doped Tungsten Disulphide Films
Mechanical and Tribological Properties of CrAlN-Ag Self Lubricating Films
Synthesis of a Rhenium Based High Temperature Tribological Coating System
High Temperature Tribological Behavior of Sputtered NbNx Thin Films
Nanocomposite Coatings Demonstrating Adaptive Lubrication Over Multiple Thermal Cycles from 25-700°C
Studies on the Thin Film Characteristics of Zirconium-Based Metallic Glass with Slight Addition of Silicon Using Magnetron Sputtering Process
F1-2
SAXS Analysis of Graphitic Amorphous Carbon
Three-Dimensional Atom Mapping of Thin Films with Atom Probe Tomography
Analysis of Multilayer Biaxially Oriented Polypropylene (BOPP) Films Using the Technique of Nano-TA (Nanoscale Probe Based Thermal Analysis)
Characterization of Plasma Sprayed TiB2 Coatings with XRD, XPS and SEM
Application of RF-GD-OES to the Analysis of Metallurgical Thin Films
Analysing of Thin Film Nanoindentation Data via Internetportal - The State of Realisation
A Study on Microstructural Evolution in Nanocrystalline TiN Thin Films
Non Destructive Nano-Mechanical Characterization of Thin Films
G5
Status of Industrial PVD on Metal Strips for Optical Purposes
Sputter Processes for Large Area Coating - Examples of Current Developments
Electro-Magnetic Levitation: A New Technology for High Rate Physical Vapour Deposition of Coatings onto Metallic Strip
Utilization of Cold-Cathode EB Guns for High-Rate PVD - State of the Art and Future Perspectives
In-Line Analyzing of Layers with High Precision by X-Ray Fluorescence
Large Area PVD Coating of Metal Strips and Sheets - New Trends and Developments in Europe
Study of 2 inch Al2O3 Substrate's Pattern by Imprinting Process
H4-2
Emergence of Macroscopic Structure from Atomistic Processes in Thin Film Growth
Ta Nanopillar Arrays Grown by Glancing Angle Deposition
Kinetics of Compound Layer Formation During Microwave Post-Discharge Nitriding
Kinetic Pathways Leading to Layer-by-Layer Growth from Hyperthermal Atoms: a Multibillion Time Step Molecular Dynamics Study
First Principles Predictions on Structures, Properties, and Dynamics of Coatings and Thin Films
Mathematical Simulation of Atomic Nitrogen Transport in a Microwave Post-Discharge
Sessions | Time Periods | Topics | Schedule Overview