ICMCTF2006 Wednesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, May 3, 2006
8:30 AM 9:30 AM 10:30 AM 11:30 AM
A3-1
Effect of Surface Preparation on the Durability of Thermal Barrier Coatings with NiCoCrAlY and Pt-Modified Aluminide Bond Coats
Synthesis by Sol-Gel Route and Characterization of Yttria Stabilized Zirconia Coatings for Thermal Barrier Applications
Thick Porous and Dense Coatings Using The Solution Precursor Plasma Spray Process
Influence of Ternary Additions of Dysprosia on the Phase Stability of EB-PVD TBCs
Combined Pre-Annealing and Pre-Oxidation Treatment for Improved Service Life of Thermal Barrier Coatings on NiCoCrAlY Bond Coatings
The NiAl/Yttria-Stabilized Zirconia Thermal Barrier Coating Deposited by Using a Hybrid Arc Ion Plating and Magnetron Sputtering System
The Thermal Cyclic Performance of NiAl/Alumina-Stabilized Zirconia Thermal Barrier Coatings Deposited Using a Hybrid Arc and Magnetron Sputtering System
Potential of ZrO2-YO1.5-TaO2.5 for TBC Applications
B10
Heuristic and Atomistic Simulation of Reactive Magnetron Sputtering
Reactive Magnetron Sputtering : the Effect of Ion Implantation
Linearized Model Analysis and LQR-Based Stabilizing Controller Design for Reactive Sputtering Processes
B2-2
Filtered Vacuum Arc Deposition of Undoped and Doped ZnO Thin Films: Electrical, Optical, and Structural Properties
Effects of Oxygen Partial Pressure on Film Growth and Electrical Properties for Undoped ZnO Films with a Thickness Below 100 nm
Effects of Oxygen Partial Pressure on Doping Properties for Ga-Doped ZnO Films Prepared by Reactive Plasma Deposition with a Traveling Substrate
Carbon Based Tribological Coatings - Deposited with Stationary Rates of 100 nm/s
B4
Characteristics of ZrC Thin Coatings Grown by Pulsed Laser Deposition
Film Growth Phenomena in High-Energetic Room Temperature Pulsed Laser Deposition on Polymer Surfaces
Wear Resistance and Tribological Properties of Superhard Ta-C Films Deposited on Various Materials by PLD
Photocatalysis of TiO2/TiO2-xNx Multilayers by Ion-Assisted Electron Beam Evaporation
Relationship Between the Nanostructure and Mechanical Properties of Pulsed Laser Deposited Dichromium Trioxide Thin Films
Crystalline Films and Nanowires of Lanthanum Monosulfide
Plasma Diagnostics of Hybrid Magnetron Sputtering and Pulsed Laser Deposition
D2-2
The Versatility of Hot-Filament Activated Chemical Vapour Deposition
Comparative Study of Diamond-Like Carbon Films from Difference Chemical Sources
Predicted Thermal-Mechanical Properties of Carbon Nanostructures: Fullerenes vs. Diamondoids
The Characteristics of Diamond-Like Carbon Film Deposited by Filter Arc Deposition
Friction and Wear Behavior of Amorphous Hard Carbon (ta-C) Coatings Under Different Lubrication Conditions
Hydrophobic and Wear Resistant Amorphous Carbon Based Multilayer Coatings
Super-Hydrophobic and Low Wetting Angle Hysterisis Surface Controlled by a-C:H:Si:O Film Deposition and Nano Structuring of Si Surface : Double Rough Structure and Free Energy Calculation
Plasma Biasing to Control the Growth Conditions of Diamond-Like Carbon
E3-1
Determination of Stress-Strain Curves of Ni and NiCo Coatings Using Nanoindentation Techniques in Combination with Inverse Methods and Microtensile Testing
Determination of Tensile Properties by Instrumented Indentation Technique: Representative Stress and Strain Approach
Neutral Networks for Determination of Stress-Strain Behavior from Indentation Tests
Nanoindentation on the C and C/Si Nanocomposites by the Continuous Stiffness Measurement Technique
Mechanical Behavior of TiC Single Layers and Ti/TiN/TiC/TiCN Multilayers on AISI 4340 Steel
Density, Stress, Hardness and Reduced Young's Modulus of Tungsten-DLC Coatings
G7-1
A Review on Technological Advances in PVD Equipment from Thermal Evaporation to Pulsed Plasma Deposition
Industrial Production of Novel PVD and CVD Coatings - Challenges to Equipment Manufacturing
Ways to Improve PVD- and PACVD-Equipment
Integration of High Performance Coating Units with LARC-Technology into Manufacturing Processes of SMEs
Recent Progress in PVD Process for Hard Coating; from Nano-Structured Coating to Aluminum Oxide Film
Hard Coating Characterisation with the Revetest (RVT) Xpress Scratch Tester
H2-1
A New Model Describing the Plasma-Assisted MBE Growth of GaN Thin Films and its Alloys with AlN and InN
Investigation of Structural and Rectifying Junction Properties of Thin ZnO-Poly(Styrene-Acrylic Acid) Nanocomposite Films on p-type (100) Si Substrates
The Effect of Annealing Time in La3Ga5SiO14 Piezoelectric Films Using Sputtering Deposition
Grain Growth in Dielectric-Encapsulated Cu Thin Films
Electron Transport in Epitaxial Cu(001)/MgO(001) Layers
Joining Using Self Propagating High Temperature Synthesis of Reactive Multilayered Thin Film Ribbons
Design and Performance of a Microelectromechanical Systems (MES) Vertical-Lift Electrothermal Actuator (VLEA)
Multifunctional Thin Film Sensors Based on Amorphous Diamond-Like Carbon for Use in Tribological Applications.
Sessions | Time Periods | Topics | Schedule Overview