Oxidation and Corrosion Protection for SiC Fibers with CVD Mullite Coatings

Current Status of Environmental Barrier Coatings for Si-based Ceramics

Coating of Carbon Ceramics via Reaction with Metal Powders

Wettability of NiAl, Ni-Al-N, Ti-B-C, and Ti-B-C-N Coatings by Glass at High Temperature

Performance of Stabilised Dicalcium Silicate Coatings in Hot-Corrosive Environments

Effect of Composition on the Oxidation and Hot Corrosion Resistance of NiAl Doped with Precious Metals

A Study of the Diffusional Response of Refractory and Other Elements in Multi-Component Systems Prior to and During CVD Aluminizing

Influence of Surface Treatment on the Oxidation of MCrAlY Coatings

The Effect of Ni-Re Interlayers on Interdiffusion from MCrAlY Overlay Coatings

Depth Profile and Quantitative Trace Elemental Analysis of Diffusion Aluminided Type Layers on Ni-base Superalloys Using High Resolution Glow-Discharge Mass Spectrometry

Recent Advances in the Post-treatment of Hard Coatings

Improvement of the Mechanical Properties of Austenitic Stainless Steel after Plasma Nitriding

Helicon Assisted Sputtering

Coatings are not a Failure of the Surface: Performance and Reliability of Coatings vs. Degradation and Damage Pattern

Invited - Missing - Funatani

Square Wave Low-frequency Modulation of the Discharge Current for High Rate Deposition of Stoichiometric Ceramic Films

Hot Target Sputtering : a New Way for High Rate Deposition of Stoichiometric Ceramic Films in the Elemental Sputtering Mode

Metal Vapor Source with High Intensity Flow for Thin Film Deposition

Invited - Missing - McGahan

Optical Properties of Amorphous Tantalum Oxide Thin Films Measured by IR-VIS-UV (0.03eV-8.5eV) Spectroscopic Ellipsometry*

A New Combined Instrument with UV-visible and Far Infrared Spectroscopic Ellipsometry for Optical Thin Film Characterization

Generalized Ellipsometry for Novel Optical Materials

Ellipsometry on Thin Layers of Biological Interest: Characterization and Applications

Ellipsometric Investigation of the Si / SiO₂ Interface Formation for Application to Highly Reflective Dielectric Mirrors.

Characterization of Thin-film Amorphous Semiconductors Using Spectroscopic Ellipsometry

Non-destructive Testing by means of Spectroscopic Ellipsometry: Fingerprint Spectra vs. Modelling

Structure and Mechanical Properties of TiC/Amorphous Hydrocarbon Nanocomposite Coatings

The Deposition and Properties of Me-DLC Coatings Deposited by DC Magnetron Sputtering

Applications of Carbon-Based Coatings Prepared by Physical and Chemical Vapour Deposition Processes

Tribological and Corrosion Properties of Ultra Thin Overcoats Deposited by PECVD

Low Stress Diamond Like Carbon (dlc) Films Deposited using Filtered Cathodic Arc

Friction and Wear Properties of ta-C Coated Plasma Nitrided Steel in Unidirectional and Reciprocating Sliding

Effects of Gas Pressure and Bias Voltage on the Properties of Amorphous Carbon and Carbon Nitride Films Produced by Plasma Enhanced CVD

CN_x and DLC Films with extremely low Roughness

Design of W Buffer Layer for Adhesion Improvement of DLC Films on Tool Steels

An Experimental Approach to Determine the Critical Parameters Related to the Mechanical Stability of Coated Systems

An Energy Description of Hard Coatings Wear Mechanisms

An Induction Period for the Abrasion of Steel by Diamondlike Carbon

Relationship of Hardness and Microstructure to the Wear Resistance of DLC Coatings

Deposition and Tribological Evaluation of Alumina/Aluminum Nano-Composite Coatings

Tribological Performance of Sprayed WC/Co Coatings

Tribology of Sol-gel aAumina Coated Al Alloys

Analytical Modelling of Mechanical Contact Problems on Multilayer Systems

Effect of Annealing Treatment and Fe₂O₃ Addition on the High Temperature Tribological Behavior of the Plasma Sprayed Zirconia Coating

Multifunctional Co-sputtered Cermet Coatings

Mechanical Properties of Composites and Mixtures with Bichalcogenides as Main Constituent

Surface Profiling of Coated Stents

Thickness Dependence of Mechanical Properties of on-Wafer Low-k Ultrathin Polytetrafluoroethylene Films

Mechanical Characterization of Ceramic Coatings

Determination of Mechanical Properties of Thick Coatings Produced by the Plasma Spray Method

A New Method of Determining Strength and Fracture Toughness of Thin Hard Coatings

Analysis of Cracking of Thin Coatings on a Metal Substrate

Qualitatively Study of Beta Silicon Carbide Residual Stress by Raman Microscopy

Tribological and Mechanical Properties of a TiC/VC Modulated Multilayer Hard Coating

Combined Reactive Deposition of TiAlN or CrN and Non-reactive MoS ₂

Reactive Deposition of Nitrides and Oxides Using a Twin-Cathode Inverted Cylindrical Magnetron

Closing the Coating Thickness Gap: LPPS Thin Film Technology

Enhancement of Machine Tool Spindle Performance Through Hybrid Bearings with Low temperature PVD coated rings

CrN/NbN Superlattice Coatings Grown by the Cathodic Arc Evaporation Technique

Microstructure and Properties of PIRAC Nitrided NiTi Surgical Alloy

An Emerging Role of Pulsed Laser Deposition in Growth of Wide Band Gap Metal-oxides and Ill-nitrides for Optoelectronics and High Temperature Devices

Nitride Thin Films Grown by Pulsed Laser Deposition Assisted by Atomic Nitrogen Beam.

Recent Advances in Pulsed Laser Deposition of Thin Films

Electrochemical Deposition of Barium Titanate Films

Fire Retardant Coatings Deposited Using Remote Plasma Polymerization of Organosilicon Monomer

Low Pressure Plasma Spray Coatings